USA flag. Handcrafted in USA
2′ x 4′ Gas-Fired Finisher/Evaporator (Without Pan)

FROM $1,485.00

5

2′ x 4′ Gas-Fired Finisher/Evaporator (Without Pan)

SKU: SL-JB2448-CUSTOMIZE
Gas-Fired Evaporator with Regulator and Stack Pipe Included
Gas-Fired Evaporator with Regulator and Stack Pipe Included Gas-Fired Finisher/Evaporator video
STARTING AT

From: $1,485.00

AVG, SHIPPING TIME

Timing is based on our current production timeline.

Shopping for your first evaporator?

Unparalleled Support

Distributed by Smoky Lake

Your Partner in Maple

Tested and Approved

Premium Maple Equipment

Description

The 2′ x 4′ Gas fired burner system will consume about 9 lbs of LP per hour at a moderate rate of fire. At this rate the pan will be evaporating around 10–12 gallons per hour.  This is a very efficient way to boil sap with gas!

On maximum fire, the 5 burners on the 2′ x 4′  burner set are capable of consuming up to 16 lbs of LP at which rate the evaporation rate increases disproportionately to about 15 gph.  Moderation and fine tuning are important if you’re using this system as your primary evaporator.  A pressure gauge on the burner manifold makes this quite easy.  Likewise, a marginally lower firing rate will be more fuel efficient, but with a slightly lower evaporation rate.

Discounts

A Full Gas-Fired Finisher Evaporator is discounted for bundling the pan and arch together. Additional accessories also available at discount as described on this page.

Value-Added Details

Premium Evaporator Pans

  • Mirror Finish Stainless Steel
  • Level Assist Feature
  • Angled Thermometer Port
  • Full Length Handles with Hemmed Edges
  • Free Pan Accessory Kit Included
  • Lifetime Limited Warranty on TIG Welds (Pans are included with Full Evaporators only.)

Gas-Fired Finisher Evaporator Arch

  • Smoky Lake exclusive, air-cool jet burners (over 70,000 BTUs each!)
  • Factory assembled and insulated arch body
  • Stack Pipe, and connection hardware included
  • Regulator included (propane version)

Handcrafted by Artisans in Wisconsin

Shipping Details

Free Shipping in the Continental USA

Most often this product will ship via FedEx Ground or SpeeDee Delivery unless it is part of a larger freight order.

Tutorials and Tips

5

2′ x 4′ Gas-Fired Finisher/Evaporator (Without Pan)

SKU: SL-JB2448-CUSTOMIZE
STARTING AT

From: $1,485.00

AVG, SHIPPING TIME

Timing is based on our current production timeline.

Shopping for your first evaporator?

This is a handcrafted, table-top propane finishing unit containing FIVE Smoky Lake LP jet burners. The high quality arch body is fully insulated, which guarantees superior efficiency and a definite “wow” factor while boiling. The unit is applauded for its great functionality and high performance.

(Please note: Chimney Pipe, Chimney Elbow and Gas Regulator (LP) ARE included, but not shown in the photo. If you are seeking a full unit WITH pans included, please see our FULL evaporator page.)

Some Assembly May Be Required

Description

The 2′ x 4′ Gas fired burner system will consume about 9 lbs of LP per hour at a moderate rate of fire. At this rate the pan will be evaporating around 10–12 gallons per hour.  This is a very efficient way to boil sap with gas!

On maximum fire, the 5 burners on the 2′ x 4′  burner set are capable of consuming up to 16 lbs of LP at which rate the evaporation rate increases disproportionately to about 15 gph.  Moderation and fine tuning are important if you’re using this system as your primary evaporator.  A pressure gauge on the burner manifold makes this quite easy.  Likewise, a marginally lower firing rate will be more fuel efficient, but with a slightly lower evaporation rate.

Discounts

A Full Gas-Fired Finisher Evaporator is discounted for bundling the pan and arch together. Additional accessories also available at discount as described on this page.

Value-Added Details

Premium Evaporator Pans

  • Mirror Finish Stainless Steel
  • Level Assist Feature
  • Angled Thermometer Port
  • Full Length Handles with Hemmed Edges
  • Free Pan Accessory Kit Included
  • Lifetime Limited Warranty on TIG Welds (Pans are included with Full Evaporators only.)

Gas-Fired Finisher Evaporator Arch

  • Smoky Lake exclusive, air-cool jet burners (over 70,000 BTUs each!)
  • Factory assembled and insulated arch body
  • Stack Pipe, and connection hardware included
  • Regulator included (propane version)

Handcrafted by Artisans in Wisconsin

Shipping Details

Free Shipping in the Continental USA

Most often this product will ship via FedEx Ground or SpeeDee Delivery unless it is part of a larger freight order.

Tutorials and Tips

There are no reviews yet.

Overall rating

2 × 3 =

01 - HANDMADE IN USA

Learn More About our Gas-Fired Finisher Evaporators

Explore how this evaporator works. Find helpful tips and resources to get the most out of this evaporator.

EXPLORE

02 - FIND THE PERFECT FIT

How Do I Know if This Evaporator Is Right For Me?

To recommend the best evaporator for you, we should consider a variety of criteria such as size, evaporation rate, fuel type and budget.

COMPARE ALL EVAPORATORS
Tutorials and Tips

Take advantage of our online resource library, 24/7. You’ll find illustrated instruction guides, videos, and a full range of maple topics!