Valve Assembly for Auto Draw Off - 1" NPT Connection
Valve Assembly for Auto Draw Off - 1" NPT Connection Optional Valve Fitting Assembly for Auto Draw-Off Systems

Auto Draw-Off Valve Assembly – 1″ Fitting


This Valve Assembly is used to connect your Automated Draw-Off Valve to your evaporator’s draw-off port.

Nipple – 1" NPT, Close × 4

Made out of 304 stainless steel. This piece of hardware is used to connect two fittings that have female threads. The size of this nipple is 1" NPT.

Tee, 1" NPT

  • 304 Stainless Steel
  • 1″ NPT (female threads on three ends)
  • Class 150

Street Elbow, 1" NPT × 2

  • 90º Elbow
  • 304 Stainless Steel
  • 1" NPT (female threads on one end and male on the other end)
  • Class 150

Ball Valve - 1" NPT × 2

  • 100% stainless steel (NOT steel plated)
  • Food grade
  • Easy grip handle
  • Full port allows unrestricted flow


This model of Valve Assembly is compatible with an evaporator pan draw-off port that is 1″ NPT.

An Automated Draw-Off Valve (shown ghosted in the product photo on this page) is included with every Smoky Lake Auto Draw-Off System. The automated valve is NOT a bundled component of the Auto Draw-Off Valve Assembly, but it is available separately.

Important Tips

  • Use plumber’s tape on all threaded connections to ensure a watertight seal and to prevent thread binding.
  • Never pull or put pressure on the Automated Valve’s Control Head. Instead, grip the stainless steel part of the Automated Draw-Off Valve with a wrench to tighten.
  • Using the Master Open/Close Valve as a throttle, strive to draw off syrup in a slow, controlled stream. Make your draws as long and continuous as possible.
  • Connect the Valve Assembly directly to your pan. Extending the assembly out further away from your pan increases the amount of torque/leverage on your pan fittings.


There are no reviews yet.

Be the first to review “Auto Draw-Off Valve Assembly – 1″ Fitting”

2 × one =