Handcrafted in USA Handcrafted in USA
| PRICE | $42.00 |
|---|---|
| AVG. LEAD TIME This is the estimated/average time required to get this product ready and/or shipped. Please note that timing may be faster when picked up at our Hilbert showroom. | |
Tested and Approved
Description
Handle length: approx 10 inches
Compatible Range of Hole Sizes: 3/4″ – 15/16″
Slight adjustments can be made to the plug’s girth by adjusting the acorn nut.
Never leave your pan unattended while it is boiling/steaming.
Continuous flow evaporators are meant to flow. Remove plugs when firing your evaporator.
Tutorials and Tips
| PRICE | $42.00 |
|---|---|
| AVG. LEAD TIME This is the estimated/average time required to get this product ready and/or shipped. Please note that timing may be faster when picked up at our Hilbert showroom. | |
Most commonly this Pan Plug is used to plug a 3/4″ NPT pan fitting. It was designed to block off the float box port, so that the Float Box could be disconnected and drained.
Similarly, this plug can be used to block off a 3/4″ NPT Draw-Off Port, so that a Draw-Off Sight Glass can be disconnected or drained.
Insert the Pan Plug into the 3/4″ port from the inside of the Evaporator Pan.
Description
Handle length: approx 10 inches
Compatible Range of Hole Sizes: 3/4″ – 15/16″
Slight adjustments can be made to the plug’s girth by adjusting the acorn nut.
Never leave your pan unattended while it is boiling/steaming.
Continuous flow evaporators are meant to flow. Remove plugs when firing your evaporator.
Tutorials and Tips
Take advantage of our online resource library, 24/7. You’ll find illustrated instruction guides, videos, and a full range of maple topics!
