Product Support

• Arches or Evaporators
  • Wiring A Silverplate Blower
  • How to Assemble a Sight Glass
  • Adjusting a Thermometer Port
  • How To Draw Off Finished Syrup
  • Double Wall Exhaust for Sugarhouses
  • Shut Down Procedure
  • Fix A Leaking Sight Glass
  • Comparing Smoky Lake Evaporators
  • Selecting An Evaporator
  • Why No Insulation Blanket In The StarCat?
• Bottling Systems
  • Vacuum Filtering
  • How to Use a Steam Bottler System
  • From Barrel To Bottle — Filtering and Bottling Series
  • Steam Escaping From the Steam Tray
• Evaporator Pans
  • Adjusting a Thermometer Port
  • How To Draw Off Finished Syrup
  • Shut Down Procedure
  • Selecting An Evaporator
  • Comparing Drop Flue Vs Raised Flue
  • Maintaining Gradient While Boiling
  • Adding Hole In Corsair Arch for a Drain Manifold on a Pan
  • Correcting a Pan Teeter
  • How to Properly Open/Close a Ball Valve
  • Quick Start Guides for Evaporator Pans
• Filtering Systems
  • How Much DE Should I Use?
  • Air Pump Installation
  • From Barrel To Bottle — Filtering and Bottling Series
  • What is the Flow Rate of the Air Diaphragm Pump?
  • How Can My Filter Press Be Used As A Transfer Pump?
  • How Does the T-Valve Operate on a Smoky Lake Filter Press?
  • Air Pump Anatomy
  • Comparing Filtering Methods
  • Caring For Flat Filters
  • How To Use Flat Filters
• Ordering Details
  • Discounts Discounts Discounts
  • Payment Options
  • Why Lead Times?
  • Cancellations
• Preheaters
  • Backflip Preheater – Installation
• RO Machines
  • Reverse Osmosis Tutorial
  • Pumping Height
  • Low-Impact Discharge Permits
  • Will A Reverse Osmosis System Alter The Properties Of My Finished Syrup?
• Tapping Equipment
  • Comparing Bags vs Tubing
  • LineViper Accessory Demos
  • Examples of Common Tubing System Repairs
  • What Is A Maple Drill Bit?
  • Prevent Inner Ring From Sliding Out Of The Bag Holder Frame
  • Tapping Too Close To Old Tap Holes
  • Understanding Tubing Fittings
  • How to Use Hand Tools for Tubing
  • What Are The Pros And Cons of Plastic Vs Stainless Steel Spouts?
  • How To Install Tubing
• Testing Instruments
  • How To Clean An Auto Draw-Off Valve
  • Draw Off Temperature Is Not Displaying Correctly.
  • Replacing the Fuse on an Auto Draw Off System
  • Understanding Stack Temperature
  • From Barrel To Bottle — Filtering and Bottling Series
  • How to Calibrate Temperature on a Smoky Lake Auto Draw-Off System
  • My Auto Draw Off Valve Is Sticking Open Or Closed?
  • When to Draw Off Syrup (Using 0–50 Thermometers)
  • Can I Dip The Murphy Compensation Cup Into My Finishing Pan While It Is Boiling?
  • Can The Murphy Compensation Cup/Float Be Used With Raw Sap?